Ny Stiler RĘBAK TARCZOWY CIĄGNIKOWY BX 42S, TRACTOR WOOD CHIPPER flishugg





















≈ 13 780 kr
Om du väljer att köpa utrustning till ett lågt pris, se till att du kommunicerar med den riktiga säljaren. Ta reda på så mycket information om ägaren av utrustningen som möjligt. Ett sätt att fuska är att representera dig själv som ett riktigt företag. Vid misstanke, informera oss om detta för ytterligare kontroll, via feedbackformuläret.
Innan du bestämmer dig för att göra ett köp, granska noga flera försäljningserbjudanden för att förstå den genomsnittliga kostnaden för din utvalda utrustning. Om priset på erbjudandet du tycker är mycket lägre än liknande erbjudanden, tänk på det. En betydande prisskillnad kan indikera dolda fel eller försök från säljaren att begå bedrägliga handlingar.
Köp inte produkter där priset är för annorlunda än genomsnittspriset för liknande utrustning.
Ge inte samtycke till tvivelaktiga löften och förbetalda varor. Om du är osäker, var inte rädd för att klargöra detaljer, be om ytterligare fotografier och dokument för utrustning, kontrollera dokumentens äkthet, ställ frågor.
Den vanligaste typen av bedrägeri. Oärliga säljare kan begära en viss förskottsbetalning för att "boka" din rätt att köpa utrustning. Således kan bedragare erhålla ett stort belopp och försvinna, utan att ni kan få kontakt längre.
- Överföring av förskottsbetalning till kortet
- Gör ingen förskottsbetalning utan pappersarbete som bekräftar processen att överföra pengar, om säljaren är osäker i meddelandet.
- Överföring till "Trustee"-kontot
- En sådan förfrågan borde vara alarmerande, du kommer sannolikt att kommunicera med en bedragare.
- Överföring till ett företagskonto med ett liknande namn
- Var försiktig, bedragare kan dölja sig som kända företag, och gör små ändringar av namnet. Överför inte pengar om företagets namn är i tvivel.
- Byte av egna uppgifter i fakturan till ett verkligt företag
- Innan du gör en överföring, se till att de angivna uppgifterna är korrekta och om de avser det angivna företaget.
Säljarens kontaktuppgifter




















WE INTRODUCE OUR MOST POPULAR, ORIGINAL, RELIABLE, VERY STRONG STILER BX 42S CHIPPER.
Equipped with a hook for attaching the device and height-adjustable feet
The new model has a thick disc and gear for greater strength and shredding power.
The machine is equipped with an emergency locking system for the material being drawn in.
Technical data:
Size of shredded material: 12cm in diameter (maximum 25cm with roots)
Drive system: direct drive, power take-off shaft
Rotor diameter: 63cm
Engine power: 18-50 km
Number of cutting knives: 4 + 1 counter-blade
Knife type: hardened tool steel
Rotor weight: 60 kg
Material description mechanism: manual operation
Mounting system: three-point suspension system (just behind)
Dimensions (with the batch funnel folded): 101cm x 106cm x 160cm
Batch hopper: 50 x 50 cm
Rotation of the ejection tube: 360 °
Height of discharge pipe: 160cm
Rated PTO speed at the end: 540-1000
Chipper weight: 225 kg
In the set you will receive:
Knives sharpened on both sides. This treatment will extend the life of one knife until the other.
Height-adjustable legs
Trailer tow hook
PTO shaft
Transport for free
Machine specification:
CHIP STILER BX42 for crushing branches and tree trunks up to 12 cm in diameter, next to suckers up to 25 cm.
The three-point chopper (three-point linkage) is available for cooperation with an agricultural tractor with a minimum power of 18 HP.
The drive is transmitted by the PTO shaft from the tractor PTO. The produced wood chips are thrown out through a 360 ° pipe rotated in relation to the chopper base.
A massive shield equipped with 4 knives, both sides sharpened + one versus a knife.
In addition, our shield is equipped with breakers (shovels) for additional chopped values obtained up to 20-40 mm.
The chipper is additionally equipped with blade ventilation.
The drop funnel can be folded for transport.
All available protections against dust, felling etc.
All hooks, bolts, etc. included - buy a machine prepared for work!
The rotor design allows for long-term operation without tractor instructions.
The machine is equipped with an emergency locking system for the material being drawn in.
Four knives sharpened on both sides, very high efficiency and machine life available.
The blades are made of tool steel hardness.
The machine has a counter blade mounted in the cutting chamber housing.
The back of the disc is equipped with breakers and discharge shovels for more efficient discharge of chips with machines.
The rotation is operated by a universal power take-off shaft, which is connected to a mechanical machine with a continuous shaft. The minimum required speed is up to 540 rpm.
The machine is equipped with a three-point linkage suspension system.
The new model is equipped with a simple and effective ratchet system that requires locking the material being drawn in.
Thanks to the simple technique, the system is reliable and trouble-free.
If you need to use the system, simply push the red safety lever and the steel latch will lower and lock the retractable element.
360 ° swiveling wood chips allow us to direct the stream in any direction.
The chipper has a ball hitch, so you can attach a trailer to the machine.
The folding hopper facilitates the storage and transport of machines.
The machine includes obtaining chips with dimensions from 20 mm to 40 mm.
In the additional option there is an extended 50 cm discharge funnel. For more information, please contact us.